乌兰察布金沙检测线路js69出产车间视频播放

无线重卡举升机专利信息.pdf

TFAUTENF无线重卡举升机原声视频

    TFAUTENF重卡举升机是一种专门用于汽车维修保养的设备，，，重要用于举升比力大的重型卡车。。它能够通过液压系统将重型卡车抬升至肯定高度，，，便于对其进行车底维修、、、更换轮胎、、、更换液压油等操作。。重卡举升机必要具备壮大的承重能力和不变性，，，以确保安全和靠得住性。。此外，，，它还需具备可移动性，，，以方便在分歧地位使用。。举升机还能够用于举升货物，，，出产线配套、、、物流码优等，，，前提必须确；；；跷锏母中郧坎徽弁。。高科技的自主出产线和国际化的组织团队使其成为重卡举升机领域的佼佼者,备受重卡汽保商、、、公交车维修服务站、、、装载车厂等领域青睐！我们严格依照欧洲尺度 EN1493: 2010 要求进行设计制作。。

产品优势：

A.我公司自主研发的电控系统，，，选取美国ZigBee无线通讯技术，，，更为高效、、、便捷的特点，，，信号不变性强，，，抗滋扰能力强，，，同时配有冗余备份系统，，，一旦受到其他滋扰源滋扰，，，备份系统启动工作，，，不影响设备正常运行。。

B.设备选取闭环节制道理，，，可进行单柱，，，双柱或多柱选择操作，，，选取微电脑处置器实季节制，，，实现高精度同步，，，设备每个柱子都配有液晶显示屏，，，实时显示起落高度，，，电池电量，，，以及设备故障报警码。。

C.设备切合人机工程学道理，，，每个柱子均有独立操控系统，，，可延长衔接六柱.开机自动选择最佳信号衔接，，，无需人为过问。。

D.设备在安全承载状态下，，，拥有机械/液压双重锁止职能，，，自动过载；；；，，，最高最低点时自动；；；，，，降落过程中，，，距离最低点33CM时，，，蜂鸣器报警，，，提醒操作人员查抄有没有阻碍物影响设备运行。。

E.每个柱子上均设有独立的电源开关以及垂危终场开关，，，一旦有垂危情况，，，可能第一功夫断电。。

F.设备在运行过程中，，，高度差达到15mm时，，，微电脑自动调整平衡。。严重超差（≥50mm）或由于某根立柱上电源掉电不能起落，，，设备自动；；；。。产品有液晶显示柱子的高度、、、模式、、、状态，，，拥有自诊断职能，，，可能显示故障状态。。

G.为了使设备移动方便，，，每个柱子都有液压小车，，，可人为拖动，，，同时配有供叉车叉举使用的防回转叉车支架。。

H.充电设备选取台湾公司出产的大功率充电器。。机能不变，，，充电效能高。。

Product advantages: 

A. The electronic control system independently developed by our company adopts the American ZigBee wireless communication technology, which is more efficient and convenient, has strong signal stability and anti-interference ability, and is equipped with redundant backup system. Once interfered by other interference sources, the backup system starts to work and does not affect the normal operation of the equipment.

B. Adopt closed-loop control principle: single column, double column or multi-column selection operation can be carried out. Real-time control by microcomputer processor is adopted to realize high-precision synchronization. The displacement sensor is used to detect the height of the equipment in real time.

C. Human Engineering: Each column is equipped with an independent control system and hydraulic power unit, which can be extended to connect six or eight columns.

D. Safety measures: When the equipment is in a safe loading state, it has a mechanical/hydraulic double locking function, automatic overload protection, which automatically stops at the highest and lowest point. When carriages descend to 330 mm off ground, they will stop automatically, and warning alarm rings to remind operator not to put feet under carriages.

E. Each column is equipped with an independent power switch, emergency stop switch, once there is an emergency, can be the first time off.

F. Diagnosing trouble function: During the operation of the equipment, when the height difference reaches 15mm, the microcomputer automatically adjusts the balance. If it is seriously out of tolerance (≥50mm) or cannot be lifted due to power failure on a certain column, the equipment will automatically stop. The product has a LCD screen display column height, mode, status, has a self-diagnosis function, and can display fault status.

G. In order to facilitate the movement of the equipment, each column has a hydraulic trolley, which can be manually dragged, and is equipped with an anti-reverse forklift bracket for forklift fork lifting.

H. The charging equipment adopts the high-power charger produced in Taiwan. Stable performance, high charging efficiency.